Certificate II in Split Air-conditioning and Heat Pump Systems - UEE20111

Course Overview

Average Course Fee: Not available

No training providers have entered fees on My Skills for this course.

Please contact individual training providers directly to compare course fees.

Average Course Duration: Not available

No training providers have entered durations on My Skills for this course.

Please contact individual training providers directly to compare course durations.

Description

Scope

The installation, commissioning and de-commissioning of single head, split air conditioning and heat pumps systems to a prescribed routine where the maximum plant capacity for each system does not exceed 18 kWr.

This includes wall hung, floor and ceiling suspended, cassette and ducted fan coil split systems and water heating heat pump systems. This qualification excludes competencies required for service, repair, maintenance, diagnostic/fault finding and electrical work or the safe and proper installation of commercial refrigeration, air conditioning and heat pump plant and equipment.

Note: 1. The letter “r” denotes “refrigeration” or cooling capacity, not electrical input power.

2. The Ozone Protection and Synthetic Greenhouse Gas Legislation Amendment Bill 2003 and the Ozone Protection and Synthetic Gas Management Regulations apply to this qualification. Prior to planning the delivery of any training and/or assessment activities all legislative and regulatory requirements shall be identified and included.

^ From 1 July 2022 the elective unit HLTAID001 must no longer be delivered and will be replaced in the Packaging Rules by the unit HLTAID009 - for more information see: https://asqa.gov.au/news-events/news/reminder-about-superseded-hlt-first-aid-units

Want to see Training Providers who offer this course?

Search All Training Providers

Student Outcomes

Students who graduate from VET courses are surveyed approximately 6 months after they have completed their training. For more information on the statistics provided in this section, including the different levels (course, field of education, all fields of education) of data available please select the Learn more button below.

Learn more

Satisfied with Training

Percentage of graduates of this course who were satisfied with the training.

Improved Work Status

Percentage of graduates of this course who started/expanded a business or who have a new job, more highly skilled work, a promotion or higher pay.

Salary

The middle of the range of salaries earned by graduates of this course starting their first ever full-time job after graduating.

Jobs

Graduates of this course are most often employed as:

94.1%

Technicians and Trades Workers

2.4%

Managers

2.2%

Professionals

Industries

Graduates of this course are most often employed in:

84%

Construction

8%

Mining

3.4%

Other Services

All statistics are supplied by the National Centre for Vocational Education Research.

Financial Assistance

The federal, state and territory governments provide financial incentives and support for vocational education and training students to help them gain the skills required to secure and maintain rewarding and sustainable employment.

There are programs for all kinds of students; apprentices and trainees, new job starters, those re-entering the workforce, retraining for a new job or upgrading their skills for an existing job.

Learn More

Subsidised Training

The following highlighted state and territory governments dedicate funds to reduce or, in some cases, fully cover tuition fees for VET students who wish to study this course. Please check with your preferred training provider to see if you are eligible.
Select a state or territory for more information.

VET Student Loans

Certain courses are eligible for a VET Student Loan from the Australian Government to assist students with paying tuition fees. The initial debt amount (including the loan fee, if applicable) plus indexation must be paid back once the loan recipient starts earning over a certain amount. Compulsory repayment threshold information is available on the Australian Taxation Office (ATO) website.

Learn More

Australian Apprenticeships

Australian Apprenticeships (also known as apprenticeships and traineeships) combine work with training in a nationally recognised qualification. Australian Apprenticeships are available to anyone of working age and offer opportunities to learn new skills and be paid in over 500 different jobs.

Unfortunately, this qualification is not currently available as an Australian Apprenticeship.

Australian Apprenticeships Pathways

Units & Packaging

Completion requirements

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 20 points in accordance with the Elective Competency Standard Units table below.

Core Competency Standard Units All Core competency standard units to be achieved		Weighting Points
UEENEEE038B	Participate in development and follow a personal competency development plan	20
UEENEEE101A	Apply Occupational Health and Safety regulations, codes and practices in the workplace	20
UEENEEE102A	Fabricate, assemble and dismantle utilities industry components	40
UEENEEE105A	Fix and secure electrotechnology equipment	20
UEENEEE107A	Use drawings, diagrams, schedules, standards, codes and specifications	40
UEENEEE137A	Document and apply measures to control OHS risks associated with electrotechnology work	20
UEENEEJ102A	Prepare and connect refrigerant tubing and fittings	30
UEENEEJ105A	Position, assemble and start up single head split air conditioning and water heating heat pump systems	70
UEENEEJ172A	Recover, pressure test, evacuate, charge and leak test refrigerants - split systems	60
UEENEEK142A	Apply environmentally and sustainable procedures in the energy sector	20
Total points in core		340

Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 20 points from the following groups:
Group			Minimum points	Maximum points
A	Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.		0	20
B	Qualification Elective Units You may select all your elective units from this Group		0	20

Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 20				Weighting Points
UEENEEC001B		Maintain documentation		20
UEENEEC002B		Source and purchase material/parts for installation or service jobs		20
UEENEEC008B		Receive and store materials and equipment for electrotechnology work		20
UEENEEC010B		Deliver a service to customers		20
UEENEEE020B		Provide basic instruction in the use of electrotechnology apparatus		20
CPCCOHS1001A		Work safely in the construction industry		10
HLTAID001 ^ HLTAID009		Provide cardiopulmonary resuscitation Provide cardiopulmonary resuscitation (must be delivered from 1 July 2022)		10
		Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework		Up to 20 points

Group B – Qualification Elective Units You may complete units to a maximum weighting of 20 You may select all your elective units from this Group		Weighting Points
UEENEEJ104A	Establish the basic operating conditions of air conditioning systems	20
UEENEEP024A	Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply	20
UEENEEP026A	Conduct in-service safety testing of electrical cord connected equipment and cord assemblies	20

Note:

1. Pre-requisite pathways shall be identified and met for all elective units selected.

2. In selecting elective units considerations to career planning advice should be given to units that form part of a pre-requisite pathway for the progression to achieve particular competencies or qualification at a higher level.

END OF QUALIFICATION

Training Providers

View training providers who offer this course and compare their course fees and durations.

Learn more

Need help choosing?

Need help choosing a training provider? Download a factsheet and comparison table to assist you with comparing training providers and making a decision.

Learn more

USI

All students undertaking nationally recognised training must have a USI in order to receive a qualification.

Learn more

Labour Market

Labour market insights can help you make decisions about study and training, your first job.

Learn more