The minimum requirements for achievement of the MEM50212 Diploma of Engineering - Technical are:
elective units, to bring the total number of units to .
appropriate Group B electives may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Diploma level. Note that the elective units listed below include all of the units that are approved for selection from the MEM05 Training Package for use in this qualification. This meets the NSSC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.
Note that when selecting elective units any prerequisite units must also be completed. Note that prerequisites can only count towards the number of electives required if they are listed in the groups below (refer to units for details).
The following additional descriptors are approved for use with this qualification:
Mechanical, Mechatronics, Manufacturing, Maintenance, Aeronautical and Avionic.
|
|
|
|
|
MEM09002B
|
Interpret technical drawing
|
|
|
MEM09202A
|
Produce freehand sketches
|
|
|
MEM09203A
|
Measure and sketch site information
|
|
|
MEM09204A
|
Produce basic engineering detail drawings
|
*
|
|
MEM09205A
|
Produce electrical schematic drawings
|
*
|
|
MEM09206A
|
Produce drawings for mechanical services
|
*
|
|
MEM09207A
|
Produce drawings for reticulated services
|
*
|
|
MEM09208A
|
Detail fasteners and locking devices in mechanical drawings
|
*
|
|
MEM09209A
|
Detail bearings, seals and other componentry in mechanical drawings
|
*
|
|
MEM09211A
|
Produce drawings or models for industrial piping
|
*
|
|
MEM09212A
|
Produce detailed drawings of steel to non-steel connections
|
*
|
|
MEM09213A
|
Produce schematic drawings for hydraulic and pneumatic fluid power systems
|
*
|
|
MEM09216A
|
Interpret and produce curved 3-D shapes and patterns
|
|
|
MEM09217A
|
Prepare plans for pipe and duct fabrication
|
*
|
|
MEM09218A
|
Participate in drafting projects for building services
|
*
|
|
MEM09219A
|
Prepare drawings for fabricated sheet metal products
|
*
|
|
MEM12024A
|
Perform computations
|
|
|
MEM13013B
|
Work safely with ionizing radiation
|
|
|
MEM15001B
|
Perform basic statistical quality control
|
|
|
MEM16003B
|
Provide advanced customer service
|
|
|
MEM16012A
|
Interpret technical specifications and manuals
|
|
|
MEM16014A
|
Report technical information
|
|
|
MEM18001C
|
Use hand tools
|
|
|
MEM24001B
|
Perform basic penetrant testing
|
*
|
|
MEM24003B
|
Perform basic magnetic particle testing
|
*
|
|
MEM24005B
|
Perform basic eddy current testing
|
*
|
|
MEM24007B
|
Perform ultrasonic thickness testing
|
*
|
|
MEM24009B
|
Perform basic radiographic testing
|
*
|
|
MEM30005A
|
Calculate force systems within simple beam structures
|
*
|
|
MEM30006A
|
Calculate stresses in simple structures
|
*
|
|
MEM30008A
|
Apply basic economic and ergonomic concepts to evaluate engineering applications
|
|
|
MEM30009A
|
Contribute to the design of basic mechanical systems
|
*
|
|
MEM30010A
|
Set up basic hydraulic circuits
|
|
|
MEM30011A
|
Set up basic pneumatic circuits
|
|
|
MEM30013A
|
Assist in the preparation of a basic workplace layout
|
|
|
MEM30014A
|
Apply basic just in time systems to the reduction of waste
|
|
|
MEM30015A
|
Develop recommendations for basic set up time improvements
|
|
|
MEM30016A
|
Assist in the analysis of a supply chain
|
|
|
MEM30017A
|
Use basic preventative maintenance techniques and tools
|
|
|
MEM30018A
|
Undertake basic process planning
|
|
|
MEM30019A
|
Use resource planning software systems in manufacturing
|
|
|
MEM30020A
|
Develop and manage a plan for a simple manufacturing related project
|
|
|
MEM30021A
|
Prepare a simple production schedule
|
|
|
MEM30022A
|
Undertake supervised procurement activities
|
|
|
MEM30023A
|
Prepare a simple cost estimate for a manufactured product
|
|
|
MEM30024A
|
Participate in quality assurance techniques
|
*
|
|
MEM30025A
|
Analyse a simple electrical system circuit
|
*
|
|
MEM30026A
|
Select and test components for simple electronic switching and timing circuits
|
*
|
|
MEM30027A
|
Prepare basic programs for programmable logic controllers
|
|
|
MEM30028A
|
Assist in sales of technical products/systems
|
|
|
MEM30031A
|
Operate computer-aided design (CAD) system to produce basic drawing elements
|
|
|
MEM30032A
|
Produce basic engineering drawings
|
|
|
MEM30033A
|
Use computer-aided design (CAD) to create and display 3-D models
|
*
|
|
CPCCOHS1001A
|
Work safely in the construction industry
|
|
|
MEA101B
|
Interpret occupational health and safety practices in aviation maintenance
|
|
|
MEA105C
|
Apply quality standards applicable to aviation maintenance processes
|
*
|
|
MEA107B
|
Interpret and use aviation maintenance industry manuals and specifications
|
|
|
MEA108B
|
Complete aviation maintenance industry documentation
|
*
|
|
MEA109B
|
Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance
|
*
|
|
MEA270A
|
Lay out avionic systems
|
*
|
|
MEA271A
|
Lay out avionic flight management systems
|
*
|
|
MEA340A
|
Lay out and set up aircraft systems
|
*
|
|
MEA341A
|
Apply basic aircraft design characteristics
|
*
|
|
MSAENV472B
|
Implement and monitor environmentally sustainable work practices
|
|
|
MSATCS301A
|
Interpret architectural and engineering design specifications for structural steel detailing
|
*
|
|
MSATCS302A
|
Detail bolts and welds for structural steelwork connections
|
*
|
|
UEPMNT419B
|
Perform civil drafting
|
|
|
Prerequisites:
|
Where a unit has prerequisites then those prerequisite units can only be used in the count towards the total number of units where they are listed in the table above.
|
|
|
|
|
|
|
MEM09011B
|
Apply basic engineering design concepts
|
|
|
MEM09210A
|
Create 3-D solid models using computer-aided design (CAD) system
|
*
|
|
MEM09214A
|
Perform advanced engineering detail drafting
|
*
|
|
MEM09215A
|
Supervise detail drafting projects
|
*
|
|
MEM09220A
|
Apply surface modelling techniques to 3-D drawings
|
*
|
|
MEM09221A
|
Create 3-D model assemblies using computer-aided design (CAD) system
|
*
|
|
MEM09222A
|
Interpret and maintain or restore original drawings
|
*
|
|
MEM09143A
|
Represent aeronautical engineering designs
|
*
|
|
MEM09144A
|
Represent avionic engineering designs
|
*
|
|
MEM09155A
|
Prepare mechanical models for computer-aided engineering (CAE)
|
*
|
|
MEM09156A
|
Prepare mechatronic models for computer-aided engineering (CAE)
|
*
|
|
MEM09157A
|
Perform mechanical engineering design drafting
|
|
|
MEM09158A
|
Perform mechatronics engineering design drafting
|
|
|
MEM12005B
|
Calibrate measuring equipment
|
*
|
|
MEM12022B
|
Program coordinate measuring machines (advanced)
|
*
|
|
MEM12025A
|
Use graphical techniques and perform simple statistical computations
|
*
|
|
MEM13010A
|
Supervise occupational health and safety in an industrial work environment
|
*
|
|
MEM14001B
|
Schedule material deliveries
|
|
|
MEM14002B
|
Undertake basic process planning
|
|
|
MEM14003B
|
Undertake basic production scheduling
|
|
|
MEM14081A
|
Apply mechanical engineering fundamentals to support design and development of projects
|
*
|
|
MEM14083A
|
Apply aeronautical fundamentals to support design and development of engineering projects
|
*
|
|
MEM14084A
|
Apply avionic fundamentals to support design and development of engineering projects
|
*
|
|
MEM14085A
|
Apply mechanical engineering analysis techniques
|
|
|
MEM14086A
|
Apply mechatronic engineering analysis techniques
|
|
|
MEM14087A
|
Apply manufactured product design techniques
|
*
|
|
MEM14088A
|
Apply maintenance engineering techniques to equipment and component repairs and modifications
|
*
|
|
MEM14089A
|
Integrate mechanical fundamentals into an engineering task
|
*
|
|
MEM14090A
|
Integrate mechatronic fundamentals into an engineering task
|
*
|
|
MEM14091A
|
Integrate manufacturing fundamentals into an engineering task
|
*
|
|
MEM14092A
|
Integrate maintenance fundamentals into an engineering task
|
*
|
|
MEM15007B
|
Conduct product and/or process capability studies
|
*
|
|
MEM15008B
|
Perform advanced statistical quality control
|
*
|
|
MEM15010B
|
Perform laboratory procedures
|
|
|
MEM15011B
|
Exercise external quality assurance
|
*
|
|
MEM15012B
|
Maintain/supervise the application of quality procedures
|
*
|
|
MEM18016B
|
Analyse plant and equipment condition monitoring results
|
*
|
|
MEM22002A
|
Manage self in the engineering environment
|
*
|
|
MEM22012A
|
Coordinate resources for an engineering project or operation
|
|
|
MEM22013A
|
Coordinate engineering projects
|
|
|
MEM22014A
|
Coordinate engineering-related manufacturing operations
|
*
|
|
MEM22015A
|
Source and estimate engineering materials requirements
|
|
|
MEM22017A
|
Coordinate continuous improvement and technical development
|
|
|
MEM22018A
|
Coordinate sales and promotion of engineering-related products or services
|
|
|
MEM23003A
|
Operate and program computers and/or controllers in engineering situations
|
*
|
|
MEM23004A
|
Apply technical mathematics
|
|
|
MEM23006A
|
Apply fluid and thermodynamics principles in engineering
|
*
|
|
MEM23007A
|
Apply calculus to engineering tasks
|
*
|
|
MEM23052A
|
Apply basic electro and control scientific principles and techniques in aeronautical engineering situations
|
|
|
MEM23063A
|
Select and test mechanical engineering materials
|
*
|
|
MEM23064A
|
Select and test mechatronic engineering materials
|
*
|
|
MEM23073A
|
Select and apply aeronautical engineering methods, processes and construction techniques
|
*
|
|
MEM23074A
|
Select and apply avionic engineering methods, processes and construction techniques
|
*
|
|
MEM23109A
|
Apply engineering mechanic principles
|
*
|
|
MEM23111A
|
Select electrical equipment and components for engineering applications
|
*
|
|
MEM23112A
|
Investigate electrical and electronic controllers in engineering applications
|
*
|
|
MEM23139A
|
Design a basic single zone duct distribution system
|
*
|
|
MEM23140A
|
Determine operational parameters for building HVAC hydronic systems
|
*
|
|
MEM23142A
|
Determine psychrometric processes and system performance
|
*
|
|
MEM23143A
|
Apply energy management principles
|
*
|
|
MEM23145A
|
Apply codes and regulations to air conditioning designs
|
*
|
|
MEM23148A
|
Develop energy management solutions
|
*
|
|
MEM23151A
|
Commission and optimise performance of HVAC/R systems
|
*
|
|
MEM23152A
|
Apply principles of refrigeration food storage technology
|
|
|
MEM23154A
|
Analyse and service HVAC/R control systems
|
*
|
|
MEM24002B
|
Perform penetrant testing
|
*
|
|
MEM24004B
|
Perform magnetic particle testing
|
*
|
|
MEM24006B
|
Perform eddy current testing
|
*
|
|
MEM24008B
|
Perform ultrasonic testing
|
*
|
|
MEM24010B
|
Perform radiographic testing
|
*
|
|
MEM24011B
|
Establish non-destructive tests
|
*
|
|
MEM24012C
|
Apply metallurgy principles
|
|
|
MEM30029A
|
Use workshop equipment and processes to complete an engineering project
|
|
|
CPPBDN5013A
|
Develop and collaborate on building information models for small-scale building design projects
|
|
|
MEA272B
|
Apply basic scientific principles and techniques in avionic engineering situations
|
|
|
MEA273A
|
Select and test avionic engineering materials
|
|
|
MEA342A
|
Apply basic aircraft power plant design characteristics
|
*
|
|
MEA349B
|
Apply basic scientific principles and techniques in aeronautical engineering situations
|
|
|
MEA350A
|
Select and test aeronautical engineering materials
|
|
|
MSS403010A
|
Facilitate change in an organisation implementing competitive systems and practices
|
|
|
MSS405010A
|
Manage relationships with non-customer external organisations
|
|
|
MSS405011A
|
Manage people relationships
|
|
|
MSS405012A
|
Manage workplace learning
|
|
|
MSS403001A
|
Implement competitive systems and practices
|
|
|
MSS403002A
|
Ensure process improvements are sustained
|
|
|
MSS405001A
|
Develop competitive systems and practices for an organisation
|
|
|
MSS405002A
|
Analyse and map a value stream
|
|
|
MSS405003A
|
Manage a value stream
|
|
|
MSS405004A
|
Develop business plans in an organisation implementing competitive systems and practices
|
|
|
MSS402030A
|
Apply cost factors to work practices
|
|
|
MSS402060A
|
Use planning software systems in operations
|
|
|
MSS402061A
|
Use SCADA systems in operations
|
|
|
MSS402080A
|
Undertake root cause analysis
|
|
|
MSS403021A
|
Facilitate a Just in Time system
|
|
|
MSS403030A
|
Improve cost factors in work practices
|
|
|
MSS403032A
|
Analyse manual handling processes
|
|
|
MSS403040A
|
Facilitate and improve implementation of 5S
|
|
|
MSS404050A
|
Undertake process capability improvements
|
*
|
|
MSS403051A
|
Mistake proof an operational process
|
|
|
MSS404052A
|
Apply statistics to operational processes
|
|
|
MSS404060A
|
Facilitate the use of planning software systems in a work area or team
|
|
|
MSS404061A
|
Facilitate the use of SCADA systems in a team or work area
|
|
|
MSS404081A
|
Undertake proactive maintenance analyses
|
|
|
MSS404082A
|
Assist in implementing a proactive maintenance strategy
|
|
|
MSS405020A
|
Develop quick changeover procedures
|
|
|
MSS405021A
|
Develop a Just in Time system
|
|
|
MSS405030A
|
Optimise cost of product or service
|
|
|
MSS405031A
|
Undertake value analysis of a product or process costs in terms of customer requirements
|
|
|
MSS405040A
|
Manage 5S system in an organisation
|
|
|
MSS405050A
|
Determine and improve process capability
|
*
|
|
MSS405060A
|
Develop the application of enterprise control systems in an organisation
|
|
|
MSS405061A
|
Determine and establish information collection requirements and processes
|
|
|
MSS405070A
|
Develop and manage sustainable energy practices
|
|
|
MSS405075A
|
Facilitate the development of a new product
|
*
|
|
MSS405081A
|
Develop a proactive maintenance strategy
|
|
|
MSATCS501A
|
Detail standardised structural connections
|
*
|
|
MSATCS502A
|
Detail structural steel members
|
*
|
|
MSATCS503A
|
Incorporate structural steel detailing into fabrication and construction project management
|
|
|
MSATCS504A
|
Detail ancillary steelwork
|
*
|
|
Prerequisites:
|
Where a unit has prerequisites then those prerequisite units can only be used in the count towards the total number of units where they are listed in the table above.
|
|
In addition to the above, the minimum requirements for this qualification can also be met by holders of the MEM30505 Certificate III in Engineering -Technical or equivalent subject to the completion of the specified Core units of competency as well as the additional elective units drawn from Group B.
In order to meet the requirements of both Regulators for employment as para-professionals in aeronautical and avionic fields in the Australian aviation industry, electives must be selected as described below for the Aeronautical and Avionic streams.
To bring the total number of electives to fifteen (15), one (1) additional unit can be chosen from Groups A or B, or from Diploma level units in the MEA11 Aeroskills Training Package.
To bring the total number of electives to fifteen (15), another three (3) units are to be selected as follows:
