Skip to content
menu

Certificate III in Roof Plumbing

CPC32611
Average Course Fee: Not available
Average Duration: Not available

This qualification provides a trade outcome in roof plumbing.

Occupational titles may include:

  • Roof plumber.
  • The qualification has core and elective unit of competency requirements that cover some common skills for the plumbing industry, as well as roof plumbing specialist units of competency.

    The plumbing industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context.

    Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

    These are the outcomes of graduates surveyed six months after completing their training for similar courses 'Certificate III in the field of Architecture and Building'

    86.1%

    Satisfied with the training
    81.7%

    Received job-related
    benefits from training
    Roof Plumber ( ANZSCO code 334115)
    Expected job openings
    Expected job openings are: above average Low Below average Average Above average High
    Above average
    87,100 persons were employed as Plumbers in 2015. Job openings over the next 5 years are expected to be between 25,001 and 50,000.
    Average weekly full time earnings
    Average weekly full time earnings are: below average Low Below average Average Above average High
    Below average
    Average weekly full time earnings before tax for Plumbers in 2014 are: $1,000. Average earnings for all occupations are: $1,200
    Source: Department of Employment. For full details on Plumbers visit Job Outlook
    This course may be subsidised in the following state and territories

    1. ACT
    2. NSW
    3. NT
    4. QLD
    5. SA
    6. TAS
    7. VIC

    For more information about financial support and subsidies for training, please refer to the Financial assistance page

    Packaging rules

    To achieve this qualification, the candidate must demonstrate competency in:

  • 25 units of competency:
  • 22 core units
  • 3 elective units.
  • Core units

    CPCCCM2008A

    Erect and dismantle restricted height scaffolding

    CPCCCM2010A

    Work safely at heights

    CPCCCM3001B

    Operate elevated work platforms

    CPCPCM2002A

    Carry out interactive workplace communication

    CPCPCM2004A

    Read plans and calculate plumbing quantities

    CPCPCM2011A

    Apply first aid in the workplace

    CPCPCM2021A

    Work effectively in the plumbing and services sector

    CPCPCM2023A

    Carry out OHS requirements

    CPCPCM2025A

    Handle and store plumbing materials

    CPCPCM2026A

    Use plumbing hand and power tools

    CPCPCM2027A

    Carry out levelling

    CPCPCM2028A

    Cut and join sheet metal

    CPCPCM2030A

    Mark out materials

    CPCPCM2035A

    Work safely on roofs

    CPCPCM3011A

    Flash penetrations through roofs and walls

    CPCPRF2012A

    Select and install roof sheeting and wall cladding

    CPCPRF3011A

    Receive roofing materials

    CPCPRF3012A

    Fabricate and install roof drainage components

    CPCPRF3013A

    Fabricate and install external flashings

    CPCPRF3014A

    Install roof components

    CPCPRF3015A

    Install roof coverings to curved roof structures

    CPCPRF3016A

    Install composite roof systems

    Elective units

    CPCCPB3015A

    Install acoustic and thermal environmental protection systems

    CPCCRI3001A

    Operate personnel and materials hoists

    CPCCST2005A

    Carry out load slinging of off-site materials

    CPCPCM2019A

    Cut using oxy-LPG-acetylene equipment

    CPCPCM2033A

    Weld using arc welding equipment

    CPCPCM2032A

    Weld using oxy-acetylene equipment

    CPCPCM2034A

    Carry out simple concreting and rendering

    CPCPCM3012A

    Weld plastic pipe using fusion method

    CPCPCM3013A

    Fabricate and install non-ferrous pressure piping

    CPCPDR2011A

    Locate and clear blockages

    CPCPDR2014A

    Install stormwater and sub-soil drainage systems

    CPCPDR2015A

    Drain work site

    CPCPDR2016A

    Install prefabricated inspection openings and enclosures

    CPCPMS3012A

    Select and fit insulation and sheathing

    CPCPRF2013A

    Collect and store roof water

    CPCPRF2014A

    Fabricate roof coverings for curved structures

    MEM05049B

    Perform routine gas tungsten arc welding

    MEM05050B

    Perform routine gas metal arc welding

    RIICCM210A

    Install trench support

    Read More

    Find a course unit



    The following occupations relate to this qualification.

    Roof Plumber
    The following industry sectors relate to this qualification.

    Building and Construction
    Building Trades
    Construction and Property



    Image See location of provider
    Image Compare two providers
    Performing Search

    Course fee: not provided $
    Duration : not provided  


    Training Provider Comparison

    Course summary
    This organisation only provides assessment services for this course
    For more information about this provider’s delivery of , please contact the training provider directly.
    Provider code:
    Course length:
    Study mode:
    Course available as an Australian Apprenticeship or Traineeship
    Course and additional fees information
    Course fees
    Duration
    Online delivery

    Online (training available online or via email submission)

    This provider has not supplied specific information about their delivery of

    Please contact them below for further details

    ENQUIRE NOW

    Training provider summary
    This training organisation provides:
      Delivery and assessment services.
      Assessment only services.
      Courses of study through Australian Apprenticeships and Traineeships.
      Recognition for prior learning.
      Financial assistance via VET Student Loans.
    Training provider type
    Registration status
    Subsidies
    This training provider is authorised to deliver subsidised courses in the following states and territories
    1. ACT
      ACT
    2. NSW
      NSW
    3. NT
      NT
    4. QLD
      QLD
    5. SA
      SA
    6. TAS
      TAS
    7. VIC
      VIC
    8. WA
      WA
    Training options
    This training provider offers courses in the following delivery modes:

    The following facilities are required at the training site:

    Offsite training is avaliable in the following locations:
    Within a radius of Km from
    Limited to the following cities:
    Limited to the following postcodes:
    Online (training available online or via email submission)
    Distance (training available via correspondence)
    Attendance required (training includes some fixed-time online lectures or fixed time class components)
    Fixed submission dates (assessment pieces have set submission dates)
    Self-paced (training has no set class times of set submission dates)

    Facilities
    Services
    Name
    Phone
    Fax
    Email
    Address
    Training organisation website
    Course enrolment webpage
    APPLY FOR THIS COURSE

    RTO Code: | Type: | Operating since
    Course fee: not provided
    Subsidies available
    VET Student Loan eligible
    Duration: not provided
    Available online
    This organisation only provides assessment services for this course
    *Information is provided by the RTO, no warranty is given by the Commonwealth as to the accuracy or reliability of the information.

    Course always available

    The following facilities are required at the training site:

    Offsite training is avaliable in the following locations:
    Within a radius of deliveryItem.Radius Km from
    Limited to the following cities:
    Limited to the following postcodes:
    Online (training available online or via email submission)
    Distance (training available via correspondence)
    Attendance required (training includes some fixed-time online lectures or fixed time class components)
    Fixed submission dates (assessment pieces have set submission dates)
    Self-paced (training has no set class times of set submission dates)

    This RTO can offer VET Student Loans for certain approved courses. A VET Student Loan is a capped loan from the Australian Government to help you pay your tuition fees. Your initial loan debt amount (loan and loan fee, if applicable), plus indexation, must be paid back once you start earning over a certain amount. The amount for the 2016-2017 income year is $54,869.

    For more information, visit the Department of Education and Training or StudyAssist.


    Contact information
    Name
    Phone
    Fax
    Address
    Training organisation website Campus website
    Student outcomes for similar courses

    These are the outcomes of graduates surveyed six months after completing their training for similar courses 'Certificate III in the field of Architecture and Building'

    81.5%

    Of people who were not employed before starting their course were employed after completing it.
    75.4 %

    Of those employed after training, were in the same occupation as their course.
    Technicians and Trades Workers
    70%
    Technicians and Trades Workers
    Labourers
    21.2%
    Labourers
    Machinery Operators and Drivers
    3.8*%
    Machinery Operators and Drivers
    Median salary of those employed in their first full-time job
    (includes those employed prior to training)

    $50,800

    $42,900


    Destination
    after training
    This
    course
    Similar
    courses
    All Certificate III courses
    Employed or in further study after training (%) - 96.1 85.2
    Employment outcomes:
    Employed (%)
    Full-time (%)
    Part-time (%)
     
    -
    -
    -
     
    94.6
    81.9
    12.1
     
    77.3
    46.1
    30.9
    Further study outcomes:
    Enrolled at University (%)
    Enrolled at TAFE (%)
    Enrolled at Other provider (%)
     
    -
    -
    -
     
    0.3*
    10.4
    11.8
     
    5
    9.8
    13.8
    Satisfied with the training (%) - 86.1 86.1
    Received job-related benefits from training (%) - 81.7 70.9
    Received personal benefits from training (%) - 89.7 90.2
    Achieved main reason for undertaking training (%) - 90.5 83.6
    Recommend the training to other (%) - 91.9 90.5

    Employment
    status
    This
    course
    Similar
    courses
    All Certificate III courses
    Median salary (Full-time) ($) - 50 800 42 900
    Top Occupations (%):
    Technicians and Trades Workers
    Labourers
    Machinery Operators and Drivers
     
     
    70
    21.2
    3.8*
     
    27.4
    26
    13.1
    Top Industries (%):
    Construction
    Manufacturing
    Professional, Scientific and Technical Services
     
     
    86.7
    4.7*
    2.1*
     
    21
    17.1
    8.9

    Employment
    status
    This
    course
    Similar
    courses
    All Certificate III courses
    Employed after training (%) - 96.3 89.8
    Median salary (Employed full-time) ($) - 64 700 46 100
    Enrolled in further study (%) - 22.4 27
    Satisfied with the training (%) - 85.4 85.8
    Achieved main reason for undertaking training (%) - 91.3 86.8

    Employment
    status
    This
    course
    Similar
    courses
    All Certificate III courses
    Employed after training (%) - 81.5 50.3
    Median salary (Employed full-time) ($) - 39 600 40 000
    Enrolled in further study (%) - 24.6* 31.7
    Satisfied with the training (%) - 84.1 86.1
    Achieved main reason for undertaking training (%) - 86.1 76.9

    Please Note:
    All statistics are supplied by the National Centre for Vocational Education Research.
    * The estimate has a relative standard error greater than 25% and therefore should be used with caution.
    ** NCVER does not report on estimates based on less than 5 respondents because the estimates are unreliable.
    For more information, please refer to the Statistics Explained page.

    Return to top

    Construction
    86.7
    Construction
    Manufacturing
    4.7*
    Manufacturing
    Professional, Scientific and Technical Services
    2.1*
    Professional, Scientific and Technical Services