Skip to content
menu

Certificate III in Gas Supply Industry Operations

UEG30114
Average Course Fee: $13500
Average Duration: 3 Years

Scope

This qualification provides competencies to conduct Gas Supply Industry activities including installation, maintenance, fault find and repair, operations of distribution and transmission gas pipelines, cylinders and associated equipment.

It is an Australia Qualification Framework (AQF) level 3 qualification and provides the required knowledge and skills to carry out work activities autonomously and takes responsibility for their own work

These are the outcomes of graduates surveyed six months after completing their training for Certificate III in Gas Supply Industry Operations

67.3%

Satisfied with the training
38.3%

Received job-related
benefits from training
Gasfitter ( ANZSCO code 334114)
Expected job openings
Expected job openings are: above average Low Below average Average Above average High
Above average
87,100 persons were employed as Plumbers in 2015. Job openings over the next 5 years are expected to be between 25,001 and 50,000.
Average weekly full time earnings
Average weekly full time earnings are: below average Low Below average Average Above average High
Below average
Average weekly full time earnings before tax for Plumbers in 2014 are: $1,000. Average earnings for all occupations are: $1,200
Source: Department of Employment. For full details on Plumbers visit Job Outlook
This qualification is available as an Australian Apprenticeship in the states and territories shown by blue colouring in the table below.

  1. ACT
  2. NSW
  3. NT
  4. QLD
  5. SA
  6. TAS
  7. VIC
For more information on apprenticeship pathways, please visit this course on aapathways.com.au
This course may be subsidised in the following state and territories

  1. ACT
  2. NSW
  3. NT
  4. QLD
  5. SA
  6. TAS
  7. VIC

For more information about financial support and subsidies for training, please refer to the Financial assistance page

Completion requirements

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

  • All the Core competency standard units to achieve a total weighting of 300 points, defined in the Core Competency Standard Units table below and
  • A combination of Elective competency standard units to achieve a total weighting of 660 points in accordance with the Elective Competency Standard Units tables below, resulting in the achievement of overall weighting of 960 points.
  • All the required pre-requisite competency standard units have been met as required.
  • Core Competency Standard Units

    All Core competency standard units to be achieved

    Weighting Points

    UEGNSG005A

    Prepare to work in the gas industry

    20

    UEGNSG132A

    Carry out basic work activities in a gas industry work environment

    60

    UEGNSG133A

    Comply with environmental policies and procedures in the utilities industry

    40

    UEGNSG141A

    Apply Workplace Health and Safety regulations, codes and practices in the gas supply industry

    20

    BSBFLM303C

    Contribute to effective workplace relationships

    40

    BSBFLM312C

    Contribute to team effectiveness

    40

    BSBWHS301A

    Maintain workplace safety

    40

    BSBWOR301B

    Organise personal work priorities and development

    40

    Total points in core

    300

    Elective Competency Standard Units

    Complete Elective units to achieve a total of weighting of 660 points from the following groups:

    Group

    Minimum points

    Maximum points

    A

    Imported and Common Elective Units

    Imported units from other qualifications, training packages and/or state accredited courses can be added to this group, but they must be at AQF level 3. If units have not being assigned a weighting by the relevant E-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, refer to UEG11 Gas Industry Training Package, Version 2, Qualification Framework.

    0

    160

    B

    Qualification AQF 2 Electives

    You may select some elective units from this Group

    0

    180

    C

    Qualification AQF 3 Electives

    You may select all your elective units from this Group

    330

    660

    D

    Qualification AQF 4 Electives

    You may select some elective units from this Group

    0

    130

    Group A – Imported and Common Elective Units

    You may complete units to maximum weighting of 160 points

    Weighting Points

    BSBFLM305C

    Support operational plan

    40

    BSBFLM306C

    Provide workplace information and resourcing plans

    40

    BSBFLM309C

    Support continuous improvement systems and processes

    40

    BSBFLM311C

    Support a workplace learning environment

    40

    BSBINN301A

    Promote innovation in a team environment

    40

    BSBWHS303A

    Participate in WHS hazard identification, risk assessment and risk control

    50

    CPCCLDG3001A

    Licence to perform dogging

    30

    CPCCLRG3001A

    Licence to perform rigging basic level

    40

    CPCCLRG3002A

    Licence to perform rigging intermediate level

    40

    CPCCOHS1001A

    Work safely in the construction industry

    10

    CPPFES2005A

    Demonstrate first attack firefighting equipment

    15

    HLTAID001

    Provide cardiopulmonary resuscitation

    10

    HLTAID003

    Provide first Aid

    10

    HLTAID005

    Provide first aid in remote situations

    10

    HLTHSE204D

    Follow safe manual handling practices

    20

    MEM05004C

    Perform routine oxy acetylene welding

    20

    MEM05012C

    Perform routine manual metal arc welding

    20

    MEM05015D

    Weld using manual metal arc welding process

    40

    MSAPMOHS110A

    Follow emergency response procedures

    20

    MSAPMOHS205A

    Control minor incidents

    30

    MSAPMOHS216A

    Operate breathing apparatus

    20

    MSAPMOHS217A

    Gas test atmospheres

    30

    MSAPMPER200C

    Work in accordance with an issued permit

    20

    MSAPMPER201A

    Monitor and control work permits

    20

    MSAPMPER202A

    Observe permit work

    20

    MSAPMPER300C

    Issue work permits

    20

    MSAPMPER400A

    Coordinate permit process

    30

    MSAPMSUP200A

    Achieve work outcomes

    30

    MSAPMSUP210A

    Process and record information

    30

    MSAPMSUP240A

    Undertake minor maintenance

    30

    MSAPMSUP303A

    Identify equipment faults

    40

    MSAPMSUP390A

    Use structured problem solving tools

    40

    MSS402061A

    Use SCADA systems in operations

    30

    MSS402080A

    Undertake root cause analysis

    50

    PMAOHS211B

    Prepare equipment for emergency response

    20

    PMAOHS310B

    Investigate incidents

    30

    PMAOHS311B

    Lead emergency teams

    20

    PMAOMIR210B

    Control evacuation to muster point

    20

    PMAOMIR346B

    Assess and secure an incident site

    30

    PMAOPS305B

    Operate process control systems

    60

    PMAOPS312B

    Undertake ship loading/unloading operations

    40

    PMAOPS330B

    Communicate and monitor pipeline activities

    40

    PMASUP311A

    Operate communications hub

    40

    PMBWELD301B

    Butt weld polyethylene plastic pipelines

    20

    PMBWELD302B

    Electrofusion weld polyethylene pipelines

    20

    PMC563081C

    Carry out stock control

    20

    RIICCM205D

    Carry out manual excavation

    10

    RIICCM206D

    Support plant operations

    10

    RIICCM207D

    Spread and compact materials manually

    10

    RIICCM208D

    Carry out basic levelling

    10

    RIICCM210D

    Install trench support

    15

    RIICRC208D

    Lay pipes

    40

    RIIHAN309D

    Conduct Telescopic Materials Handler Operations

    80

    RIIMPO304D

    Conduct wheel loader operations

    40

    RIIMPO308D

    Conduct tracked dozer operations

    40

    RIIMPO309D

    Conduct wheeled dozer operations

    40

    RIIMPO318D

    Conduct civil construction skid steer loader operations

    70

    RIIMPO319D

    Conduct backhoe/loader operations

    50

    RIIMPO320D

    Conduct civil construction excavator operations

    80

    RIIWHS202D

    Enter and work in confined spaces

    30

    RIIWHS204D

    Work safely at heights

    20

    RIIWHS205D

    Control traffic with stop-slow bat

    10

    RIIWHS302D

    Implement traffic management plan

    20

    RIISAM201D

    Handle resources and infrastructure materials and safely dispose of non-toxic materials

    15

    RIIWMG203D

    Drain and dewater civil construction site

    20

    TLIB2004A

    Carry out vehicle inspection

    20

    TLIC2002A

    Drive light rigid vehicle

    40

    TLIC2025A

    Operate four wheel drive vehicle

    40

    TLIC3003A

    Drive medium rigid vehicle

    40

    TLIC3004A

    Drive heavy rigid vehicle

    40

    TLIC3005A

    Drive heavy combination vehicle

    40

    TLIC4067A

    Operate LP gas tanker

    40

    TLID2003A

    Handle dangerous goods/hazardous substances

    40

    TLID2010A

    Operate a forklift

    40

    TLID2016A

    Load and unload explosives and dangerous goods

    30

    TLID3015A

    Identify and label explosives and dangerous goods

    20

    TLID3023A

    Use specialised liquid bulk gas transfer equipment

    40

    TLID3027A

    Prepare for transport of dangerous goods

    50

    TLID3033A

    Operate a vehicle-mounted loading crane

    40

    TLID3036A

    Lift and move load using a mobile crane

    40

    TLIF2006A

    Apply accident-emergency procedures

    20

    TLIF2010A

    Apply Fatigue Management Strategies

    30

    TLIF2012A

    Apply safe procedures when handling/transporting dangerous goods or explosives

    30

    TLILIC0012A

    Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)

    40

    TLILIC2001A

    Licence to operate a forklift truck

    40

    TLILIC2014B

    Licence to drive a light rigid vehicle

    40

    TLILIC2015B

    Licence to drive a medium rigid vehicle

    40

    TLILIC2016B

    Licence to drive a heavy rigid vehicle

    50

    TLILIC3006A

    Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

    60

    TLILIC3008A

    Licence to operate a slewing mobile crane (up to 20 tonnes)

    70

    TLILIC3013A

    Preparation to transport dangerous goods by road

    50

    TLILIC3017B

    Licence to drive a heavy combination vehicle

    60

    TLILIC3018B

    Licence to drive a multi combination vehicle

    60

    TLILIC4009A

    Licence to operate a slewing mobile crane (up to 60 tonnes)

    70

    UEENEEC001B

    Maintain documentation

    20

    UEENEED101A

    Use computer applications relevant to a workplace

    20

    Imported units from other qualifications, training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

    Note: For further information see Application of the NQC Flexibility Formula, Page 10, UEG11 Gas Industry Training Package, Version 1, Volume 1 Qualification Framework

    Up to 160 points

    Group B – Qualification AQF 2 Electives

    You may complete units to maximum weighting of 180 points

    Weighting Points

    UEENEEE102A

    Fabricate, assemble and dismantle utilities industry components

    40

    UEENEEE107A

    Use drawings, diagrams, schedules, standards, codes and specifications

    40

    UEENEEM080A

    Report on the integrity of explosion-protected equipment in a hazardous area

    20

    UEGNSG004A

    Locate, prove and protect utility assets

    60

    UEGNSG006A

    Use a portable gas detector to locate escape

    40

    UEGNSG134A

    Establish a utilities infrastructure work site

    60

    UEGNSG136A

    Carry out transmission pipeline construction work activities

    60

    UEGNSG140A

    Apply environmental policies and procedures in the utilities industry

    20

    UEGNSG219A

    Conduct excavations in the utilities industry

    60

    UEGNSG221A

    First on site response to gas pipeline emergencies

    90

    UEGNSG224A

    Construct and lay copper and stainless steel gas distribution pipelines

    60

    UEGNSG226A

    Assist with the construction, laying and connection of gas distribution services to mains

    40

    UEGNSG227A

    Assist with the construction and laying of gas distribution mains

    40

    UEGNSG330A

    Coat metallic pipelines

    80

    UEGNSG331A

    Establish right of way access for transmission pipeline construction

    60

    UEGNSG332A

    Undertake hydro-testing for transmission pipeline construction

    60

    UEGNSG333A

    Work in proximity of transmission pipeline construction plant and equipment

    40

    UEGNSG342A

    Maintain pipeline easements

    40

    UEGNSG615A

    Fill LPG cylinders

    80

    UEGNSG616A

    Refurbish gas cylinders

    80

    UEGNSG705A

    Disconnect and reconnect small capacity gas meters

    40

    UEGNSG708A

    Pressure Test Residential and Small Commercial Gas Installations

    40

    UEGNSG711A

    Process meter reading information using appropriate technology

    40

    UEGNSG712A

    Read and record meter readings

    40

    UEGNSG714A

    Relight Type A gas appliances

    60

    UEGNSG804A

    Maintain single stage and single run gas flow and pressure control and measuring devices

    80

    UEPOPS203B

    Operate and Monitor Communications System

    20

    UEPOPS205B

    Conduct Minor Mechanical Maintenance

    30

    UETTDREL14A

    Working safely near live electrical apparatus as a non-electrical worker

    40

    Group C – Qualification AQF 3 Electives

    At least 330 points to be achieved from this group. You may select all your elective units from this Group.

    Weighting Points

    UEENEEM020A

    Attend to breakdowns in hazardous areas — gas atmospheres

    20

    UEENEEM076A

    Use and maintain the integrity of a portable gas detection device

    20

    UEGNSG135A

    Monitor and control gas odourisation

    100

    UEGNSG137A

    Operate and maintain gas station water bath heaters

    60

    UEGNSG138A

    Install and commission stationary gas fuelled turbine engines

    60

    UEGNSG139A

    Repair and maintain stationary gas fuelled turbine engines

    60

    UEGNSG142A

    Conduct isolations under the permit to work system for gas industry work sites

    80

    UEGNSG212B

    Construct, lay and connect a gas distribution service to a plastic main

    60

    UEGNSG213B

    Construct, lay and connect a gas distribution service to a steel main

    60

    UEGNSG216A

    Commission or decommission gas distribution pipelines

    100

    UEGNSG217A

    Launch and recover PIGs in a gas distribution pipeline

    100

    UEGNSG218A

    Carry out surveillance on gas distribution assets

    90

    UEGNSG220A

    Construct and lay Polyethylene gas distribution mains

    60

    UEGNSG222A

    Construct and lay nylon or PVC gas distribution mains

    60

    UEGNSG223A

    Construct and lay steel gas distribution pipelines

    60

    UEGNSG225A

    Perform routine maintenance on distribution pipeline facilities and equipment

    100

    UEGNSG228A

    Construct and lay large copper gas distribution pipelines

    60

    UEGNSG229A

    Prepare simple drawings of as laid gas mains and services

    40

    UEGNSG344A

    Commission or decommission gas transmission pipelines

    120

    UEGNSG346A

    Launch and recover PIGs in gas transmission pipelines

    100

    UEGNSG347A

    Perform routine maintenance on transmission pipeline facilities and equipment

    110

    UEGNSG348A

    Supervise the operation of plant and equipment for the construction of gas transmission pipelines

    60

    UEGNSG349A

    Carry out surveillance of gas transmission pipelines

    110

    UEGNSG350A

    First response to a gas facility event

    60

    UEGNSG352A

    Check and report on gas station conditions

    40

    UEGNSG353A

    Carry out aerial surveillance of gas transmission pipelines

    60

    UEGNSG354A

    Control excavations in the vicinity of gas transmission pipelines

    60

    UEGNSG355A

    Monitor and report on cathodic protection systems

    60

    UEGNSG356A

    Monitor and operate flow control, pressure measuring and regulating devices for gas transmission

    100

    UEGNSG411A

    Maintain cathodic protection systems

    100

    UEGNSG412A

    Install cathodic protection systems

    110

    UEGNSG506A

    Respond to gas infrastructure emergencies

    80

    UEGNSG507A

    Remotely monitor and operate gas transmission flow and pressure measuring and regulating devices

    90

    UEGNSG508A

    Remotely check and report on gas station conditions

    40

    UEGNSG614A

    Load, unload, exchange and connect LPG cylinders

    80

    UEGNSG617A

    Monitor and control the transfer of bulk LPG

    100

    UEGNSG618A

    Process Liquefied Petroleum Gas (LPG)

    100

    UEGNSG619A

    Perform scheduled maintenance on gas processing or storage facilities and equipment

    110

    UEGNSG620A

    Organise the repair of faults in LPG processing or storage facilities and equipment

    80

    UEGNSG621A

    Control bulk storage of LPG

    110

    UEGNSG622A

    Assess the operational capability of gas safety equipment on a delivery vehicle

    40

    UEGNSG706A

    Test New Residential and Small Commercial Gas Installations

    60

    UEGNSG713A

    Investigate billing exceptions-conditions

    60

    UEGNSG805A

    Maintain multi-stage and multi-run gas flow and pressure measuring and regulating devices

    80

    UEGNSG807A

    Install Gas Flow, Measuring and Pressure Regulating Devices

    80

    UEGNSG811A

    Monitor and operate complex flow control, measuring and regulating devices for gas distribution

    110

    UEPMNT367A

    Install and commission stationary gas fuelled reciprocating engines

    60

    UEPMNT368A

    Repair and maintain stationary gas fuelled reciprocating engines

    60

    UEPOPS317B

    Operate and Monitor Fixed Fire Protection Systems

    30

    UEPOPS336B

    Manage, operate and monitor a gas turbine unit

    60

    UEPOPS347B

    Operate and monitor supervisory, control and data acquisition systems

    40

    Group D – Qualification AQF 4 Electives

    You may complete units to maximum weighting of 130 points

    Weighting Points

    UEGNSG106B

    Coordinate repair of pipeline, facilities and equipment

    110

    UEGNSG108B

    Operate and monitor pipeline control systems

    60

    UEGNSG109B

    Control field pipeline operations

    60

    UEGNSG110B

    Supervise technical operations for gas distribution or transmission

    60

    UEGNSG111B

    Produce maintenance strategies and plans for a gas facility

    80

    UEGNSG131A

    Compile a gas industry technical report

    20

    UEGNSG204B

    Coordinate and conduct gas distribution pipeline repair and modifications

    110

    UEGNSG207B

    Coordinate construction, laying and testing of gas distribution pipelines

    110

    UEGNSG210B

    Supervise and monitor contract staff for work on distribution pipelines

    120

    UEGNSG305B

    Coordinate gas transmission pipeline repair and modifications

    110

    UEGNSG308B

    Identify, evaluate and control threats to transmission pipelines

    40

    UEGNSG310B

    Supervise and monitor contract work

    60

    UEGNSG311B

    Site control of third party works in the vicinity of a transmission pipeline

    80

    UEGNSG314B

    Liaise with third party and the community to maintain pipeline integrity and community safety

    40

    UEGNSG319B

    Custody transfer metering and gas quality analysis

    80

    UEGNSG324A

    Follow procedures to deal with incidents related to the abuse of drugs and alcohol

    60

    UEGNSG325A

    Coordinate the operation of relevant plant and equipment for transmission pipeline construction

    80

    UEGNSG326A

    Coordinate and monitor staff and contractors

    60

    UEGNSG327A

    Coordinate transmission pipeline construction operations

    60

    UEGNSG511A

    Operate gas infrastructure to meet nominated demand

    120

    UEGNSG512A

    Control centre communication with gas industry stakeholders

    110

    UEGNSG514A

    Monitoring and controlling field activities

    110

    UEGNSG515A

    Use control centre systems to monitor and control gas infrastructure

    110

    UEGNSG611B

    Control LPG storage/processing operations

    110

    UEGNSG612B

    Supervise technical operations for liquefied petroleum gas storage and processing

    120

    UEGNSG806A

    Maintain SCADA controlled gas flow and pressure & electronic gas measurement equipment

    100

    Note:

    1. Prerequisite pathways shall be identified and met for all elective units selected.

    2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

    END OF QUALIFICATION

    Read More

    Find a course unit



    The following occupations relate to this qualification.

    Gas Industry Operator (Cathodic Protection)
    Gas Industry Operator (Distribution/Transmission)
    Gas Industry Operator (Support Services)
    Gas Industry Operator (Systems Operations/Pressure Centre)
    The following industry sectors relate to this qualification.

    Gas Industry
    Utilities Services



    Image See location of provider
    Image Compare two providers
    Performing Search

    Course fee: not provided $
    Duration : not provided  


    Training Provider Comparison

    Course summary
    This organisation only provides assessment services for this course
    For more information about this provider’s delivery of , please contact the training provider directly.
    Provider code:
    Course length:
    Study mode:
    Course available as an Australian Apprenticeship or Traineeship
    Course and additional fees information
    Course fees
    Duration
    Online delivery

    Online (training available online or via email submission)

    This provider has not supplied specific information about their delivery of

    Please contact them below for further details

    ENQUIRE NOW

    Training provider summary
    This training organisation provides:
      Delivery and assessment services.
      Assessment only services.
      Courses of study through Australian Apprenticeships and Traineeships.
      Recognition for prior learning.
      Financial assistance via VET Student Loans.
    Training provider type
    Registration status
    Subsidies
    This training provider is authorised to deliver subsidised courses in the following states and territories
    1. ACT
      ACT
    2. NSW
      NSW
    3. NT
      NT
    4. QLD
      QLD
    5. SA
      SA
    6. TAS
      TAS
    7. VIC
      VIC
    8. WA
      WA
    Training options
    This training provider offers courses in the following delivery modes:

    The following facilities are required at the training site:

    Offsite training is avaliable in the following locations:
    Within a radius of Km from
    Limited to the following cities:
    Limited to the following postcodes:
    Online (training available online or via email submission)
    Distance (training available via correspondence)
    Attendance required (training includes some fixed-time online lectures or fixed time class components)
    Fixed submission dates (assessment pieces have set submission dates)
    Self-paced (training has no set class times of set submission dates)

    Facilities
    Services
    Name
    Phone
    Fax
    Email
    Address
    Training organisation website
    Course enrolment webpage
    APPLY FOR THIS COURSE

    RTO Code: | Type: | Operating since
    Course fee: not provided
    Subsidies available
    VET Student Loan eligible
    Duration: not provided
    Available online
    This organisation only provides assessment services for this course
    *Information is provided by the RTO, no warranty is given by the Commonwealth as to the accuracy or reliability of the information.

    Course always available

    The following facilities are required at the training site:

    Offsite training is avaliable in the following locations:
    Within a radius of deliveryItem.Radius Km from
    Limited to the following cities:
    Limited to the following postcodes:
    Online (training available online or via email submission)
    Distance (training available via correspondence)
    Attendance required (training includes some fixed-time online lectures or fixed time class components)
    Fixed submission dates (assessment pieces have set submission dates)
    Self-paced (training has no set class times of set submission dates)

    This RTO can offer VET Student Loans for certain approved courses. A VET Student Loan is a capped loan from the Australian Government to help you pay your tuition fees. Your initial loan debt amount (loan and loan fee, if applicable), plus indexation, must be paid back once you start earning over a certain amount. The amount for the 2016-2017 income year is $54,869.

    For more information, visit the Department of Education and Training or StudyAssist.


    Contact information
    Name
    Phone
    Fax
    Address
    Training organisation website Campus website
    Student outcomes for Certificate III in Gas Supply Industry Operations

    These are the outcomes of graduates surveyed six months after completing their training for Certificate III in Gas Supply Industry Operations

    Data not available for this course
    Technicians and Trades Workers
    15.5 %

    Construction Trades Workers

    Of those employed after training, were in the same occupation as their course.
    Technicians and Trades Workers
    35.1%
    Technicians and Trades Workers
    Machinery Operators and Drivers
    35.1%
    Machinery Operators and Drivers
    Labourers
    14.4%
    Labourers
    Median salary of those employed in their first full-time job
    (includes those employed prior to training)

    $73,900

    $50,800

    $42,900


    Destination
    after training
    This
    course
    Similar
    courses
    All Certificate III courses
    Employed or in further study after training (%) 94.2 96.1 85.2
    Employment outcomes:
    Employed (%)
    Full-time (%)
    Part-time (%)
     
    93.3
    90.4
    -
     
    94.6
    81.9
    12.1
     
    77.3
    46.1
    30.9
    Further study outcomes:
    Enrolled at University (%)
    Enrolled at TAFE (%)
    Enrolled at Other provider (%)
     
    0
    -
    21.2
     
    0.3*
    10.4
    11.8
     
    5
    9.8
    13.8
    Satisfied with the training (%) 67.3 86.1 86.1
    Received job-related benefits from training (%) 38.3 81.7 70.9
    Received personal benefits from training (%) 68.3 89.7 90.2
    Achieved main reason for undertaking training (%) 75 90.5 83.6
    Recommend the training to other (%) 74 91.9 90.5

    Employment
    status
    This
    course
    Similar
    courses
    All Certificate III courses
    Median salary (Full-time) ($) 73,900 50 800 42 900
    Top Occupations (%):
    Technicians and Trades Workers
    Machinery Operators and Drivers
    Labourers
     
    35.1
    35.1
    14.4
     
    70
    21.2
    3.8*
     
    27.4
    26
    13.1
    Top Industries (%):
    Construction
    Mining
    Electricity, Gas, Water and Waste Services
     
    48.5
    19.6
    18.6
     
    86.7
    4.7*
    2.1*
     
    21
    17.1
    8.9

    Employment
    status
    This
    course
    Similar
    courses
    All Certificate III courses
    Employed after training (%) - 96.3 89.8
    Median salary (Employed full-time) ($) - 64 700 46 100
    Enrolled in further study (%) - 22.4 27
    Satisfied with the training (%) - 85.4 85.8
    Achieved main reason for undertaking training (%) - 91.3 86.8

    Employment
    status
    This
    course
    Similar
    courses
    All Certificate III courses
    Employed after training (%) - 81.5 50.3
    Median salary (Employed full-time) ($) - 39 600 40 000
    Enrolled in further study (%) 24 24.6* 31.7
    Satisfied with the training (%) - 84.1 86.1
    Achieved main reason for undertaking training (%) - 86.1 76.9

    Please Note:
    All statistics are supplied by the National Centre for Vocational Education Research.
    * The estimate has a relative standard error greater than 25% and therefore should be used with caution.
    ** NCVER does not report on estimates based on less than 5 respondents because the estimates are unreliable.
    For more information, please refer to the Statistics Explained page.

    Return to top

    Construction
    48.5
    Construction
    Mining
    19.6
    Mining
    Electricity, Gas, Water and Waste Services
    18.6
    Electricity, Gas, Water and Waste Services
    Gas Industry

    Note: Information provided as a guide only.  Chart developed by the Australian Apprenticeships & Traineeships Information Service (aatinfo.com.au). Information in this chart may be reproduced with acknowledgement of its source: "The Australian Apprenticeships & Traineeships Information Service (aapathways.com.au/jpc) funded by the Australian Government Department of Education and Training".