Skip to content
menu

Certificate III in Warehousing Operations

TLI31610
Average Price: $3298
Average Duration: 1 Year

Rationale:

A general qualification for the Warehousing and Storage Industry. Successful completion will require competency in units that relate to work defined as aligned at AQF Level 3.

Performance of a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.

These are the outcomes of graduates surveyed six months after completing their training for Certificate III in Warehousing Operations

86.5%

Satisfied with the training
65.7%

Received job-related
benefits from training
Storeperson (ANZSCO code 741111)
Expected job openings
Expected job openings are: high Low Below average Average Above average High
High
120,300 persons were employed as Storepersons in 2014. Job openings over the next 5 years are expected to be greater than 50,000.
Average weekly full time earnings
Average weekly full time earnings are: low Low Below average Average Above average High
Low
Average weekly full time earnings before tax for Storepersons are: $874. Average earnings for all occupations are: $1,152
Source: Department of Employment. For full details on Storepersons visit Job Outlook

Entry requirements:

There are no entry requirements for this qualification.

This qualification is available as an Australian Apprenticeship in the states and territories shown by blue colouring in the table below.

  1. ACT
  2. NSW
  3. NT
  4. QLD
  5. SA
  6. TAS
  7. VIC
For more information on apprenticeship pathways, please visit this course on aapathways.com.au
This course may be subsidised in the following state and territories


For more information about financial support and subsidies for training, please refer to the Financial assistance page

Requirements for completion of the qualification:

A successful assessment outcome for a total of 18units of competency comprising:

2 core units listed below

plus

16 elective units which may be taken from the elective units listed below, or up to 3 units may be drawn with appropriate contextualisation from qualifications at the same level or one higher in this Training Package or any other endorsed Training Package or accredited course.

Where imported units are selected, care must be taken to ensure that all pre-requisites specified are complied with.

Core units:

Field

Unit

F Safety Management

TLIF1001A Follow occupational health and safety procedures

L Resource Management

TLIL1001A Complete workplace orientation/induction procedures

Elective units:

Field

Unit

A Handling Cargo/Stock

TLIA3004A Process receipt and delivery of containers and cargo

TLIA3010A Coordinate goods to bond premises

TLIA3015A Complete receival/despatch documentation

TLIA3016A Use inventory systems to organise stock control

TLIA3017A Identify products and store to specifications

TLIA3018A Organise despatch operations

TLIA3019A Organise receival operations

TLIA3024A Organise warehouse records operations

TLIA3026A Monitor storage facilities

TLIA3038A Control and order stock

TLIA3039A Receive and store stock

B Equipment Checking and Maintenance

TLIB2001A Check and assess operational capabilities of equipment

TLIB3002A Test equipment and isolate faults

D Load Handling

TLID2010A Operate a forklift

TLID2013A Move materials mechanically using automated equipment

TLID3011A Conduct specialised forklift operations

TLID3014A Load and unload vehicles carrying special loads

TLID3015A Identify and label explosives and dangerous goods

TLID3023A Use specialised liquid bulk gas transfer equipment

TLID3024A Use specialised liquid bulk transfer equipment (gravity/pressurised)

TLID3027A Prepare for transport of dangerous goods

TLID3031A Rig load

TLID3033A Operate a vehicle-mounted loading crane

TLID3035A Operate a boom type elevating work platform

TLID3036A Lift and move load using a mobile crane

TLID3040A Control lift and movement of crane

TLID3043A Shift loads using gantry equipment

TLID3044A Shift loads using cranes

E Communication and Calculation

TLIE3002A Estimate/calculate mass, area and quantify dimensions

TLIE3004A Prepare workplace documents

TLIE3012A Consolidate manifest documentation

TLIE3015A Undertake rigger/dogger and driver communication

TLIE3016A Estimate/calculate load shifting requirements for a mobile crane

F Safety Management

TLIF3003A Implement and monitor occupational health and safety procedures

TLIF3004A Organise occupational health and safety procedures in the workplace

TLIF3022A Implement/monitor procedures when warehousing/storing dangerous goods and/or hazardous substances

TLIF3093A Implement chain of responsibility regulations

G Teamwork

TLIG3002A Lead a work team or group

I Customer Service

BSBCUS301B Deliver and monitor a service to customers

J Quality

TLIJ3002A Apply quality systems

TLIJ3005A Sample, inspect and test products to specifications

TLIJ3006A Implement grain protection procedures

L Resource Management

TLIL3002A Undertake employee payroll activities

TLIL3003A Conduct induction process

BSBWOR301B Organise personal work priorities and development

LIC Licensing Units

TLILIC2001A Licence to operate a forklift truck

TLILIC2002A Licence to operate an order picking forklift truck

O Security

TLIO3004A Conduct control procedures for transferring explosives and dangerous/hazardous/high risk goods

TLIO3016A Apply and monitor workplace security procedures

TLIO2021A Follow security procedures when working with goods and cargo

P Administration and Finance

TLIP3026A Maintain financial records in a small business

TLIP3015A Document a records system

TLIP3016A Identify and classify records to be captured

TLIP3019A Provide records retrieval service

TLIP3020A Sentence records

TLIP3021A Undertake disposal program

TLIP3022A Undertake movement of records

TLIP3023A Destroy records

U Environment

TLIU2012A Participate in environmentally sustainable work practices

TLIU3011A Implement and monitor environmentally sustainable work practices

W Equipment and Systems Operations

TLIW3006A Operate computerised mail and parcels sorting equipment

TLIW3007A Code and coordinate video-coding operations

TLIW3008A Carry out culler facer canceller (CFC) operations

TLIW2018A Operate hand held air/power equipment for production processes

TLIW2019A Apply surface coatings using a spray gun

TLIW2022A Manufacture pallets using automated methods

TLIW2024A Dock boards using computer programmed machinery

TLIW2025A Dock boards on mechanical feeds

Read More

Find a course unit



The following occupations relate to this qualification.

Cold Store Operator
Credits/Returns Officer
Dispatch Clerk
Forklift Driver
General Warehouse Operator
Grain Handler
Postal Worker
Purchasing Clerk
Stock Controller
Storeperson
The following industry sectors relate to this qualification.

Business Administration
Business Services
Purchasing and Procurement
Transport
Warehousing and Storage



Image See location of provider
Image Compare two providers
Performing Search

Price: not provided $
Duration : not provided  


Training Provider Comparison

Course summary
This organisation only provides assessment services for this course
This organisation provides delivery and assessment services for this course
For more information about this provider’s delivery of , please contact the training provider directly.
Provider code:
Course length:
Study mode:
Course available as an Australian Apprenticeship or Traineeship
Provider description
Course fees
Duration
Online delivery

Online (training available online or via email submission)

This provider has not supplied specific information about their delivery of

Please contact them below for further details

CONTACT US

Training provider summary
This training organisation provides:
  Delivery and assessment services.
  Assessment only services.
  Courses of study through Australian Apprenticeships and Traineeships.
  Recognition for prior learning.
  Financial assistance via VET FEE HELP.
Training provider type
Registration status
Subsidies
This training provider is authorised to deliver subsidised courses in the following states and territories
  1. ACT
    ACT
  2. NSW
    NSW
  3. NT
    NT
  4. QLD
    QLD
  5. SA
    SA
  6. TAS
    TAS
  7. VIC
    VIC
  8. WA
    WA
Training options
This training provider offers courses in the following delivery modes:

The following facilities are required at the training site:

Offsite training is avaliable in the following locations:
Within a radius of Km from
Limited to the following cities:
Limited to the following postcodes:
Online (training available online or via email submission)
Distance (training available via correspondence)
Attendance required (training includes some fixed-time online lectures or fixed time class components)
Fixed submission dates (assessment pieces have set submission dates)
Self-paced (training has no set class times of set submission dates)

Facilities
Services
Name
Phone
Fax
Email
Address
Training organisation website
Course enrolment webpage
APPLY FOR THIS COURSE

RTO Code: | Type: | Operating since
Subsidies available
Price: not provided
Duration: not provided
This organisation only provides assessment services for this course
This organisation provides delivery and assessment services for this course

Course always available

The following facilities are required at the training site:

Offsite training is avaliable in the following locations:
Within a radius of deliveryItem.Radius Km from
Limited to the following cities:
Limited to the following postcodes:
Online (training available online or via email submission)
Distance (training available via correspondence)
Attendance required (training includes some fixed-time online lectures or fixed time class components)
Fixed submission dates (assessment pieces have set submission dates)
Self-paced (training has no set class times of set submission dates)

This RTO is eligible to offer VET FEE-HELP loans. VET FEE-HELP is a loan from the Australian Government that helps pay your course fees. VET FEE-HELP loans have to be paid back once you begin earning over a certain amount. Even though you may not have to pay anything upfront, you should take into consideration your full VET FEE-HELP loan amount.

 

The calculator below helps you to understand what your debt will be when you start your course, and how it may increase if you do not earn enough to begin paying back the loan.

 

For further information on VET FEE-HELP, please visit the Study Assist website.

Contact information
Name
Phone
Fax
Address
Training organisation website Campus website
Student outcomes for Certificate III in Warehousing Operations

These are the outcomes of graduates surveyed six months after completing their training for Certificate III in Warehousing Operations

31.5%

Of people who were not employed before starting their course were employed after completing it.
Machinery Operators and Drivers
29.4 %

Storepersons

Of those employed after training, were in the same occupation as their course.
Machinery Operators and Drivers
42.8%
Machinery Operators and Drivers
Labourers
20.2%
Labourers
Technicians and Trades Workers
11.6%
Technicians and Trades Workers
Average salary of those employed in their first full-time job
(includes those employed prior to training)

$48,100

$40,200

$48,600


Destination
after training
This
course
Similar
courses
All Certificate III courses
Employed or in further study after training (%) 69.2 81.6 85.8
Employment outcomes:
Employed (%)
Full-time (%)
Part-time (%)
 
61.5
38.8
21.1
 
71.2
37
32.9
 
76.7
44.4
31.4
Further study outcomes:
Enrolled at University (%)
Enrolled at TAFE (%)
Enrolled at Other provider (%)
 
-
4.0*
12.1
 
7.2
11.8
14.2
 
5.3
14
11.5
Satisfied with the training (%) 86.5 86.2 87.5
Received job-related benefits from training (%) 65.7 66.7 78.7
Received personal benefits from training (%) 88.9 92 94.7
Achieved main reason for undertaking training (%) 62.7 72.1 82.5
Recommend the training to other (%) 85.0 88.5 91.2

Employment
status
This
course
Similar
courses
All Certificate III courses
Average salary (Full-time) ($) 48,100 40 200 48 600
Top Occupations (%):
Machinery Operators and Drivers
Labourers
Technicians and Trades Workers
 
42.8
20.2
11.6
 
34.4
19.5
12.2
 
30.8
25.7
11.2
Top Industries (%):
Manufacturing
Transport, Postal and Warehousing
Retail Trade
 
23.8
20.1
13.4
 
17.6
13.7
9.6
 
20.1
15.9
9

Employment
status
This
course
Similar
courses
All Certificate III courses
Employed after training (%) - 88.1 90.1
Average salary (Employed full-time) ($) - 42 100 51 200
Enrolled in further study (%) - 34.1 29
Satisfied with the training (%) - 87 87.8
Achieved main reason for undertaking training (%) - 79.9 87.4

Employment
status
This
course
Similar
courses
All Certificate III courses
Employed after training (%) 31.5 40.3 49.3
Average salary (Employed full-time) ($) - 36 400 43 700
Enrolled in further study ($) 17.4 32.4 34.6
Satisfied with the training (%) - 84.7 87
Achieved main reason for undertaking training (%) - 58.6 73.1

Please Note:
All statistics are supplied by the National Centre for Vocational Education Research.
* The estimate has a relative standard error greater than 25% and therefore should be used with caution.
** NCVER does not report on estimates based on less than 5 respondents because the estimates are unreliable.
For more information, please refer to the Statistics Explained page.

Return to top

Manufacturing
23.8
Manufacturing
Transport, Postal and Warehousing
20.1
Transport, Postal and Warehousing
Retail Trade
13.4
Retail Trade
Transport and Logistics
Stream Certificate II Certificate III Certificate IV Diploma Advanced Diploma
Driving Operations and Road Transport          
Logistics          
International Freight Forwarding          
Stevedoring          
Material Logistics          
Mobile Crane Operations          
Rail Operations and Rail Infrastructure          
Vehicle Instruction          
Furniture Removalist          

Note: Information provided as a guide only.  Chart developed by the Australian Apprenticeships & Traineeships Information Service (aatinfo.com.au). Information in this chart may be reproduced with acknowledgement of its source: "The Australian Apprenticeships & Traineeships Information Service (aapathways.com.au/jpc) funded by the Australian Government Department of Education and Training".